Multi-layer Mesh Belt Hot Air Dryer Features
1. New design for through circulation mesh-belt drying to get uniform air hot velocity & high efficiency drying rate
2. Hot air is circulation and the temperature is adjustable in accordance with the different drying section. Also, drying time is controlled and adjusted following to final dryness request.
3. The blower takes the fresh air after heat exchanger with max 140 oC into the bottom layer and moist air moist air is exhausted by the exhauster fan on the top, keep safety and workshop cleaning.
4. Hot air only entrance the bottom mesh-belt layer to pass through the material with temperature adjustable and high impacting velocity, Hot air only entrance the bottom mesh-belt layer to pass through the material with temperature adjustable and high impacting velocity, the exiting hot air goes to the other layer for drying continually, so energy saving is available. The whole drying process with stably and high effect will be finished.
5. According to the variety and processing capacity of agricultural products, 3 or 5 layers mesh belt drying are option to achieve upper layer feeding and lower layer discharging.
6. Steam heating is recommended, also, electric heating is available.
Multi-layer Mesh Belt Hot Air Dryer Technical Data for a 1500Kg/h Seaweed Drying
No. |
Item |
Technical data |
01 |
Total length |
35m |
02 |
Net width of mesh belt |
2m |
03 |
Drying units |
5 pcs |
04 |
Mesh-belt layer |
5 ply |
05 |
Efficiency drying area |
300m2 |
06 |
Hot air temperature |
50– 140 oC |
07 |
Steam pressure for heat exchanger |
0.2-0.6MPa |
08 |
Blower fan |
7.5kw, 5pcs |
09 |
Hot air circulation fan |
4 kw,15pcs |